On eBay Now...
FULL KIT NIXIE TUBE IN-12 CLOCK with 12 or 24 hour time format.
AFTER PURCHASE, PLEASE WRITE DOWN WHAT TIME FORMAT YOU NEED THE WATCH FOR
Includes: full set of radio parts, tubes, power port, Usb-C power cable, sanded plywood case with clear front panel.
Once assembled, you will have a fully working and ready to use clock.
All parts are checked for proper functioning before shipping.
After dispatch you will receive an email with detailed instructions and assembly video.
The ARDUINO NANO microcontroller will be flashed before shipping.
CAREFUL: POWER SUPPLY ONLY 5 VOLTS 1-2 AMPS
- Clock displays time in HH:MM format (24 hours);
- Numbers turning modes (No effect, smooth transition through fading, number rewind, cathode rewind, "Train", "Rubber");
- Night mode from 23:00 till 7:00 (the light of the lamps is much softer);
- The clock runs correctly even after a power outage;
- Also you can enable / disable "glitches mode" which looks stylish and vintage.
Parts list:
1. Arduino NANO - 1 pc
2. PCB board - 2 pcs
3. RTC DS3231 - 1 pc
4. PBS-40 and PLS-40 - 1 pc
5. Capacitor 350 V 4,7 uF - 1 pc
6. Resistor 470 kOhm - 1 pc
7. Inductor 220 uH 240 mA - 1 pcs
8. Diode HER106 - 1 pc
9. Transistor IRF840PBF - 1 pc
10. Optocoupler TLP627(F) DIP-4 - 4 pcs
11. Decoder K155ID1 - 1 pcs
12. Light-emitting diode - 5 pcs (4 blue pcs, 1 yellow pc)
13. Resistor 100 Ohm 0,25 W - 3 pcs
14. Resistor 150 Ohm 0,25 W - 1 pcs
15. Resistor 470 Ohm 0,25 W - 1 pcs
16. Resistor 10 kOhm 0,25 W - 1 pcs
17. Capacitor 10 V 470 uF - 1 pc
18. Power port Usb-C - 1 pcs
19. Usb-C power cable - 1 pcs
